Technical Bulletin
14/06/17

Use of Retarders in Prestressed Concrete – TB-0501

Two common uses of retarders in prestressed concrete are (1) to control the setting characteristics of…

Use of Retarders in Prestressed Concrete – TB-0501
Technical Bulletin

Effect of High Dosage of AEA on Compressive Strength – TB-0203

There is no standard addition rate for air-entraining agents (AEA), such as DARAVAIR® and DAREX®. The…

Effect of High Dosage of AEA on Compressive Strength – TB-0203
Technical Bulletin

Using DARATARD® 17 – TB-0502

Performance Guide Concrete sets as a result of a chemical reaction (hydration) between the Portland cement…

Using DARATARD® 17 – TB-0502
Technical Bulletin

Strength and Durability of Flowing Concrete using DARACEM® 19 – TB-0603

A series of tests was conducted to evaluate the durability of flowing, superplasticized concrete. Three separate…

Strength and Durability of Flowing Concrete using DARACEM® 19 – TB-0603
Technical Bulletin

Recommended Placing, Finishing and Curing Procedures for FORCE 10,000D® Concrete Flatwork – TB-0701

When FORCE 10,000D® concrete mixes are used in flatwork such as parking garage floors, bridge decks,…

Recommended Placing, Finishing and Curing Procedures for FORCE 10,000D® Concrete Flatwork – TB-0701
Technical Bulletin

The Use of FORCE 10,000D® for Sulfate Resistance Concrete – TB-0702

In areas where soils and ground water have high sulfate contents, or structures in a marine…

The Use of FORCE 10,000D® for Sulfate Resistance Concrete – TB-0702
Technical Bulletin

Recommended Procedures for Batching and Mixing FORCE 10,000D® Concrete – TB-0703

The key to producing high quality, high performance concrete with FORCE 10,000D® is thorough mixing. It…

Recommended Procedures for Batching and Mixing FORCE 10,000D® Concrete – TB-0703
Technical Bulletin

Calculating Concrete Mix Proportions for FORCE® 10,000D Concrete – TB-0704

This technical bulletin describes the steps required to adjust concrete mix proportions to accommodate the addition…

Calculating Concrete Mix Proportions for FORCE® 10,000D Concrete – TB-0704
Technical Bulletin

Shrinkage Characteristics of FORCE 10,000® Concrete – TB-0708

FORCE 10,000D® concrete is typically used in applications where cracking may be a major concern. These…

Shrinkage Characteristics of FORCE 10,000® Concrete – TB-0708
Technical Bulletin

Offset the Potential Corrosive Effect of Chlorides in a Concrete Mix Using DCI® – TB-0901

DCI® Corrosion Inhibitor may be used to offset the corrosive effects of chloride ions found in…

Offset the Potential Corrosive Effect of Chlorides in a Concrete Mix Using DCI® – TB-0901
Technical Bulletin

Recommended Placing, Finishing and Curing Procedures for Flatwork Concrete Containing DCI® – TB-0902

Concrete containing DCI® Corrosion Inhibitor can be used in flatwork with little or no modification to…

Recommended Placing, Finishing and Curing Procedures for Flatwork Concrete Containing DCI® – TB-0902
Technical Bulletin

Low Shrinkage Mix Design Optimization Guidelines for ECLIPSE® Floor 200 – TB-1001

ECLIPSE® Floor 200 Shrinkage Reducing Admixture is a liquid concrete admixture specifically formulated for reducing the…

Low Shrinkage Mix Design Optimization Guidelines for ECLIPSE® Floor 200 – TB-1001